All Articles

In modern manufacturing, Mold Base Mold is an indispensable and key component in processes such as plastic injection molding and die casting. Mold Base Mold carries the core and moving parts of the mold, which directly affects the accuracy, surface quality and production efficiency of the product. Mold Base Mold features: Provide stable support: Mold Base Mold can provide a stable support structure for the mold to ensure that the mold does not deform or shift during the production process, thereby ensuring pr

Properties and Applications of Carbon Steel I. Introduction Carbon steel, commonly referred to as carbon steel, is a type of iron-carbon alloy with a carbon content ranging from 0.0218% to 2.11%. Due to its unique chemical composition and microstructure, carbon steel exhibits a series of outstanding properties, making it widely used in various industries. This paper will provide a detailed introduction to the properties and applications of carbon steel. II. Basic Properties of Carbon Steel Strengt

Electroplating of Steel Materials (1) Material processing Steel is used in all industrial sectors and is transformed into products and electroplated through the following metal processing processes.and electroplated 1) Mechanical processing such as bending, cutting, stretching, cutting, grinding, etc. is carried out through stamping and other means. 2) Melt cast iron or iron alloy before casting, or heat it before forging. 3) Surface hardening is carried out through heat treatment (such as quenching

Precautions when assembling the discharge plate guide posts :     The influence of plate processing error and bonding gap on the guide posts of the discharge plate When manufacturing molds, machining errors between punching plates, discharge plates, and templates, as well as bonding gaps between guide bushings, may affect the deviation of the core when inserting the convex mold. If the convex mold is inserted in this state, it will deform due to misalignment of the core, which may cause the convex mold

The most important molds for stamping processing are convex and concave molds. Next is the discharge plate. The structure of the mold is mainly composed of these three elements as the center. (Figure 1) Basic structure of the mold: The content of Figure 1 is mainly classified based on the following two conditions. 1. Position of convex and concave molds convex mold on top and convex mold on bottom (formal installation); convex mold on bottom and convex mold on top (reverse installation) 2. Is there a d

Linear guide rail, also known as slide rail, linear guide rail and linear guide rail, is used to support and guide moving parts to make reciprocating linear motion in a given direction. With the same moving component volume, it has higher rated load and movement accuracy than linear bearing, and can bear certain torque load. Linear guide rail can be used for heavy-load transportation in horizontal space, precise positioning movement and precise guidance movement in vertical space, realizing reliable movement in sma