name:
VBF
brand:
JIANGDUN
Material:
SKD11
Hardness:
58-62HRC
1. bushing for locating pins can be used for positioning precision
molds such as connectors and electronic components.
2. The core shall be positioned before it is embedded into the cavity to
prevent wear and damage of the core.
3. For the installation type of parting surface, the parting surface can be
disassembled for maintenance.
4. This precision positioning pin assembly is an ultra precision precision
positioning pin, and the coaxiality of a single piece of the taper facing pin
and the outer diameter of the sleeve is less than 0.005mm
5. Taperless fine locating pin set needs to use higher positioning parts to
ensure accurate mold closing because there is a gap between the guide
post and the guide sleeve.
6. Precise positioning: locate the corresponding positions of the cavity
(fixed mold insert) and core (movable mold insert) to prevent their
misplacement, so as to avoid such undesirable phenomena.
7. The connector and electronic component mold use a large number of
small and precise cores with narrow spacing. In order to avoid mutual
collision between cores, precise positioning is required
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
